1. The design process of high-temperature motors is different from that of ordinary motors. They are made of high-temperature resistant insulating materials, which can ensure that the motors operate safely in high-temperature environments without aging or burning out. 2. The motor performance is designed according to the characteristics of the fan pump load, which can save energy and insulation structure. With reinforced insulation, it can operate continuously in a positive and negative rotation cycle under the water vapor atmosphere of high temperature and humidity wood precipitates for a long time, thereby ensuring reliable insulation and improving service life.
A ventilator is a machine that removes air by increasing the pressure of a gas. It is widely used in our industrial production, and there are many applications in our daily life. "Centrifugal fans are the most widely used type of centrifugal fans, and the most important thing about centrifugal fans is their installation. Today, let's take a look at the skills and precautions required in the installation method of centrifugal fans."...
When installing a negative pressure fan, it is important to do a good job of installation, especially without gaps around the fan. When installing a negative pressure fan, it is best to close all the surrounding doors and windows, but the doors and windows on the opposite wall should be opened to ensure the flow of air. The installation of negative pressure fans is very important and directly affects their future use.
The negative pressure fan is preferably installed in the middle of the building interior, close to the location where high temperature, muggy heat, and concentrated smoke and odor are generated; If possible, install it in the upper direction of the dominant wind in the cooling environment; It can be installed on indoor walls, windows, roofs, and indoor load-bearing columns. However, it is important to note that the installation environment should ensure smooth and fresh air, and in particular, it should not be installed at exhaust outlets with odor or odor gases. If there are not enough doors or windows, a special air supply system needs to be installed, and the air volume of the air supply system should be greater than 100-150% of the total suction volume of the negative pressure fan.