Proper maintenance and maintenance is an important guarantee for the safe and reliable operation of the circulating fan and the improvement of the service life of the fan. Therefore, when using a tobacco baking cycle fan, it must be given full attention. Maintenance and maintenance of the impeller At the beginning of the impeller operation and all regular inspections, the impeller must be inspected for cracks, abrasion, dust and other defects as long as there is an opportunity. Whenever possible, the impeller must be kept clean,
Tobacco baking cycle fan generally includes an electric motor, a transmission shaft, a bearing seat and a fan blade. The output shaft of the motor is directly connected to the upper end of the transmission shaft through a coupling, and the blade is fixed at the bottom end of the transmission shaft, and is directly driven. In the way, the motor directly drives the transmission shaft to rotate, so the stability during transmission is good, and the bearing on the transmission shaft is not easily worn. There are also diesel engines equipped. In the event of power failure, the diesel engine can be used to drive the fan to rotate, which can prevent the tobacco from being baked normally due to power failure.
Fans can be divided into several types according to the material used, such as iron shell fan (common fan), fiberglass fan, plastic fan, aluminum fan, stainless steel fan, etc.
The drying kiln motor is also a kind of motor, so their maintenance process is the same. The special kiln motor maintenance process: cleaning the rotor - replacing the carbon brush or other parts - vacuum F-grade pressure immersion paint - drying -- School balance.