产品增白

Drying and dust removal integrated machine

This integrated drying and dust removal machine is designed based on the functional requirements for drying and dehumidifying grain products as well as separating dust and impurities. The entire machine consists of a four-way air inlet, a permanent-magnet variable-frequency fan, a primary large cyclone separator, a secondary small cyclone separator, an impurity discharge outlet, a purified air outlet, and a return-air duct, among other components.

Keywords: high-temperature motor, axial flow fan, booster fan

Category：

Drying and dust removal integrated machine

Hotline：

400-668-0593

0593-6313388

Messages

PRODUCT DESCRIPTION
TECHNICAL DATA
INSTALLATION DIMENSIONS

- Commodity name: Drying and dust removal integrated machine
- Commodity ID: 3
This integrated drying and dust removal machine is designed based on the functional requirements for drying and dehumidifying grain products as well as separating dust and impurities. The entire machine consists of a four-way air inlet, a permanent-magnet variable-frequency fan, a primary large cyclone separator, a secondary small cyclone separator, an impurity discharge outlet, a purified air outlet, and a return-air duct, among other components.
Product Introduction
The CCE series permanent magnet variable-frequency drying and dust removal integrated machine is a high-efficiency dust collector specifically designed for use with grain dryers. It is suitable for separating moisture and dust particles during the drying process of various grains.
This integrated drying and dust removal machine is designed based on the functional requirements for drying and dehumidifying grain products as well as separating dust and impurities. The entire machine consists of a four-way air inlet, a permanent-magnet variable-frequency fan, a primary large cyclone separator, a secondary small cyclone separator, an impurity discharge outlet, a purified air outlet, and a return-air duct. The moist gas containing dust and impurities from the drying tower is drawn into the fan under negative pressure generated by the permanent-magnet variable-frequency fan. As it passes through the rotating impeller and guide vanes, it forms a counter-rotating vortex flow. In the primary large cyclone separator, impurities and dust are separated from each other. Under the combined effects of gravity and centrifugal force, the dust and impurities are directed along the wall toward the secondary small cyclone separator, where they are further concentrated and discharged. The purified airflow exiting the secondary small cyclone separator is then returned to the primary cyclone separator for repeated separation, achieving highly efficient dust removal.
This integrated drying and dust removal machine is designed to accommodate the varying physical properties of agricultural products such as wheat, rice, paddy, corn, and rapeseed. During the drying process, a permanent-magnet variable-frequency motor provides stepless speed adjustment, enabling precise control over air volume and pressure to meet the dehumidification and dust removal requirements under different operating conditions. It can effectively remove particles larger than 5–15 microns, with a dust removal efficiency exceeding 95%. This integrated machine boasts advantages including strong adaptability, high efficiency, energy savings, intelligent cluster control, and maintenance-free operation.
Intelligent Control System
The control system features an IP66-rated enclosure, providing dustproof, waterproof, moisture-resistant, and high-temperature resistance for use in harsh indoor and outdoor environments.
The system features SVC (open-loop vector) control, offering electromagnetic interference resistance, radiation protection, a compact size, lightweight design, and an elegant appearance.
The system comes with built-in protection features against overvoltage, undervoltage, voltage loss, current imbalance, phase failure, overload, collision, overheating, lightning strikes, and abnormalities.
The communication standard is Modbus 485.
Technical Parameters
CCF/G7.5S-8 (Vertical) CCF/L7.5S-8 (Horizontal)
Power: 5.5 kW
Voltage: 380V
Frequency: 50/60 Hz
Protection rating: IP55
Insulation class: F
Work mode: S1
CCF/G8S-8 (vertical) CCF/L8S-8 (horizontal)
Power: 7.5 kW
Voltage: 380V
Frequency: 50/60 Hz
Protection rating: IP55
Insulation class: F
Duty cycle: S1
CCF/G10S-8 (Vertical) CCF/L10S-8 (Horizontal)
Power: 11 kW
Voltage: 380V
Frequency: 50/60 Hz
Protection rating: IP55
Insulation class: F
Duty cycle: S1